Home > Question About > Question About Agp Card And Irq Allocatoin In Win2k

Question About Agp Card And Irq Allocatoin In Win2k

Replaced the old DFI AMD mainboard with a new MSI Pentium. Apparently it can be done but not sure how.

Motherboard : ABIT TH7II-Raid with a P4-1.6

jasperuk (#2) cunzor Videocard: Processor: Mainboard: Good thing Tolunay jumped in here.When I was setting up Win2000 on my machine here, I did go through quite a bit of BIOS tweaks. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. http://olivettipc.com/question-about/question-about-a-vid-card.html

Once reported, our moderators will be notified and the post will be reviewed. Non of its acceleration featureswork at all. The IRQ assigment is controlled by the Operating system. So that's noproblem at all.

You can use other software to overclock the card.Jay"Chaos" wrote inmessage news:[email protected]> I have a Visiontek 9200Se 128mb AGP card. Check out this Microsoft Knowledge Base article for more info...Q182628Pay special attention to the second paragraph of the section titled "More Information" at the end of the article. · actions · IRQ Question Every device on my PCI bus is assigned to irq 9 inside of win2000 even though at bootup the MB bios is assiging them to various irqs.

It still keeps ******* up on IRQ 5 & 11. Recheck seating of memory and AGP card.More than one memory chip?... However if I do this win2k has no way to auto allocate the correctmemory resource ranges for that change... IRQ questions 6.

Best HD DVR [CharterSpectrum] by RoadZOmbie352. Without ACPI, the BIOS assign the IRQ's, not Win2000. If it can't, then you may need to do some juggling. -- Lee MS-MVP http://support.microsoft.com/support. Off-Topic Tags How-tos Drivers Ask a Question Computing.NetForumsGeneral HardwareVideo Cards WinXP P&P does not see Nvidia 6200 AGP card Tags:cardAGPnvidia dave_in_essex November 18, 2009 at 11:45:31 Specs: Windows XP Hi,I have

by R. Yes No I don't know View Results Poll Finishes In 2 Days.Discuss in The LoungePoll History About Us | Advertising Info | Privacy Policy | Terms Of Use and Sale | The options are:· To ISA Legacy IRQs· To I/O APIC IRQs (default)For operating systems that recognize the I/O APIC, selecting To I/O APIC makes more PCI IRQsavailable to the computer. forget NVIDIA."new card was purchased only to meet requirements of newer games" This is what Bob and I are seeing....

  • Open Task Manager -> log your CPU and memory use.6. (slim, very slim) H/D failingBill.
  • Are you overclocked?4.
  • Training topics range from Android App Dev to the Xen Virtualization Platform.
  • chuck Flag Permalink This was helpful (0) Collapse - Re: Forcing the IRQ for Video Card upgrade by FLWB / October 14, 2004 11:17 AM PDT In reply to: Re: Forcing
  • I have installed the via4-1drivers.
  • Open Device Manager if windows does not show any devices with conflicts then you have none .....

Even if you override IRQ's and assign each PCI slot's IRQ manually W2K will assign all PCI devices to 1 IRQ while using ACPI compliant system and ACPI HAL. Email *Required Your Feedback *Required Answers others found helpful How to change the IRQ on a PCI card? I had sound card and NIC conflict causing broken sound due to NIC activity. However whenever I install this driver, windows freezes on the next boot, and all I can do to rescue my system is to boot into Safe mode and uninstall the driver.

I?ve tried uninstalling and reinstalling the cards and drivers but no luck. check my blog Series (WDM) OKIRQ 12 PS/2 Compatible Mouse OKIRQ 13 Numeric data processor OKIRQ 14 Primary IDE Channel OKIRQ 15 Secondary IDE Channel OK Flag Permalink This was helpful (0) Collapse - You may have to try the cards in different slots. How can a different IRQ be assigned to the Fireconnect/DVPics Plus 4300?

in win2k, go to device manager, and go into computer, and it's in there. Youcan try moving the card to a different slot so as to not use the samePCI interrupt as another high demand piece of hardware.(read AGP card).The SW IRQ's are only for Good call on that one. this content Please refer to our CNET Forums policies for details.

The BIOSand/or operating system chooses an IRQ from whatever set of IRQs thatthe motherboard allows for a card in that slot. Heat5. I suppose we'll all have to go through this again when Windows releases its 64-bit only operating system!! 0 LVL 32 Overall: Level 32 Desktops_PCs 12 Message Active today

I am shocked by Comcast's contract structure! [ComcastXFINITY] by jonquiljo5565.

Any thoughts? cunzor « Previous Thread | Next Thread » Thread Tools Show Printable Version Display Modes Linear Mode Switch to Hybrid Mode Switch to Threaded Mode Posting Rules You may not post Get the answer Ask a new question Read More Radeon Visiontek Motherboards Graphics Related Resources 7500 AGP vs. 9200SE PCI Radeon 9200SE agp card Radeon 7000 AGP / Radeon 9200SE 128mb Is your SCSI and NIC on motherboard?Tolunay[text was edited by author 2000-10-30 22:03:12] · actions · 2000-Oct-30 9:58 pm · HFB1217The Wizard join:2000-06-26Camelot SwFL

HFB1217 2000-Oct-31 1:54 pm

Usually I watch people reload the OS a few dozen times till these areas are addressed. i had a problem with a network card sorta like that, and i had to both reserve in the bios and turn of irq steering in windows to get it working... If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). http://olivettipc.com/question-about/question-about-video-card.html Computing.Net cannot verify the validity of the statements made on this site.

Series (WDM) OKIRQ 6 Standard floppy disk controller OKIRQ 8 System CMOS/real time clock OKIRQ 9 Microsoft ACPI-Compliant System OKIRQ 10 MPU-401 Compatible MIDI Device OKIRQ 11 NVIDIA GeForce FX 5200 However, you will lose some features like power button control and configuration.Also, check your motherboard manual on which PCI slots gets which IRQ, if you have more than 4 PCI and Yes, they put the 2 Interrupt controllers and times and a bunch of more complex stuff on 1 or 2 chips these days but from software point of view it still Can the USB2connect 3100LP share an IRQ with other devices?

Therefore the Audigy 4 is a reasonable compromise. 8 Replies 1 View Switch to linear view Disable enhanced parsing Permalink to this page Thread Navigation Gary 2005-09-03 12:26:46 UTC Ross Ridge So I dont know what to do. Yes Just plug the card in and let Windows allocate the resources it needs. Cars and tech. [Security] by carpetshark3423.

Non of its accelerationfeatures> work at all. From what i understand IRQ #9 can not be used if IRQ #2 is > being used. I have a abit-VT7 motherboard. Any other sites affected?

Visiontek AGP model for Radeon 3850 Questions. new Obihai devices [VOIPTechChat] by Galaxysurfer344. But this is what troubleshooting is about. You mentioned having all slots filled.

In just a few minutes you may discover something you didn't know existed that is easy enough for you to fix yourself! win 2k newbie irq question 12. Search Forums Show Threads Show Posts Advanced Search Tag Search Go to Page...

Thread Tools Display Modes
(#1) jasperuk Videocard: This is on NVIDIA's site [With more devices being included in today's PC systems, it forces system builders to install components that share IRQ's with other devices.

Crowned, bulging or leaking replace M/B. This way the OS itself could solve and resolve any addressing or interrupt conflicts occurring as a result of multiple PCI boards coexisting with each other and with other system devices--without