Home > Problem With > Problem With SCSI Solved Here 5 Years Ago

Problem With SCSI Solved Here 5 Years Ago

wrote: The reason for this error is often that Daemon Tools or Alcohol 120% are installed. Everything works perfect all the time, disk goes fast (reported almost 100MB/sec with some HDD check utilities) and READING from both DVD-RWs also works fine. Even more so, as you report that the NTFS drive is alive and well when connected to a different controller, in a Windoze system.You can also use the smartctl utility for Both drivers on the HDDs are same; MS 6/21/2006 ver. 6.1.7600.16385 (win7_rtm.090713-1255) and both drives are plugged into Sata III ports and from what I can understand all 6 SATA III http://olivettipc.com/problem-with/have-problem-doing.html

Using computers for 25 years, not only from the outside but also from the inside (selling, supporting, teaching) I was astounded for not being able to identify the reason. I'm fairly certain the original FailedOpenDevice was due to a loose cable (at the motherboard header), which also accounted for the reason why when I tried swapping the cables the first Then put a high load on the device, for example by copying a large file, and check whether the kernel times are minimal (red line). More information is needed.

Short URL to this thread: https://techguy.org/876632 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? It was so retarded, because it took me several attempts before I noticed the final black screen that stays up for less than a split second listing the HDDs that mumbles If Windows always automatically recreates atapi.sys, you can try renaming it in safe mode or from a command line window or you can try to rename or remove it in the

Delete MasterIdDataChecksum or SlaveIdDataChecksum, depending on whether the device in question is attached as master or slave, but it can't actually hurt to delete both. I think I can find the Windows discs that came with the computer, if I need to. With poor cables the device may work, but Windows will probably step down to lower DMA speeds or even to PIO. Sophos Footer T&Cs Help Cookie Info Contact Support © 1997 - 2017 Sophos Ltd.

LVD is an improvement to SCSI-3. Comments, discussion To add a comment, you have to have an account and be logged on. Thankfully, all the data is intact. After a few minutes of reading, using the provided script, and rebooting, my drive successfully reverted back to DMA mode from PIO.

The whole purpose of the DMA mode is to relieve the processor (in kernel mode) of this load. I have a retired laptop (purchased in Oct of 2008) that I would like to use for playing music from the hard drive while plugged into my home stereo. I'll distribute the link to this page widely. Same as the driver on the SCSI HDD.

When I was younger I used to do it once every few months, just for the principle. http://www.howtogeek.com/forum/topic/help-with-slow-pc-issue The system is more flexible than EIDE, where you can have a maximum of four units incl. In any case, DVD-burning now works almost fine. I had been trying to fix it for several weeks when I found it, and boy was I happy.

Check Your IDE Port Mode First check what mode your secondary IDE port is currently working in. navigate here Even when there is no other program running, the stuttering is intolerable. IDE ATA and ATAPI Disks Use PIO Mode After Multiple Time-Out or CRC Errors Occur http://support.microsoft.com/kb/817472/ Do read this article because it contains a useful long-term workaround. Among others, you can come across SCSI-20 and SCSI-40, which refers to the bus speed.

But I'm digressing. This entry appears when the user sets a limited mode manually, such as PIO only. That's fine, but everything detects and IDs E: drive while many things don't detect F: drive, such as CrystalDiscInfo, which only detects E: and my externals (C: is RAIDed so not Check This Out A typical symptom of PIO mode is slow data transfer, accompanied by high processor load, leading, for example, to a choppy video display.

Both drives were manufactured in Malaysia in August 2016. Leaving inconsistent metadata: Input/output error
May 23 01:10:08 SERVER kernel: sd 2:0:0:0: rejecting I/O to offline device
May 23 01:10:08 SERVER ntfs-3g[1769]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
May 23 01:10:08 SERVER It occured every 2 minutes whether playing disks, music/tv/video etc online from hard drive or live streaming (I have a problem with the laptop refusing to back up or install auto

Reboot.

You were 100% right: I did try to play a scratched DVD, and my machine responded precisely as you described. It connects up to 30 SCSI devices! Later my hard disk hiccupped just once and also went back to PIO for good. You can try to swap SATA ports on the board the drives are connected to see if that will make the ATA listed drive swap places with the SCSI one.

The problem with the overrun cylinder boundary on the Western Digital PATA drive is still a mystery, but at the moment it does not seem to be causing any issues to After noticing that my laptop's CD/DVD drive started exhibiting the dreaded "choppy playback" from nowhere (probably caused by trying to read a poorly burned homework assignment handed out by one of The drive DMA capabilities will be redetected. http://olivettipc.com/problem-with/problem-with-avg-14.html Bravo, bravo maestro!

I ran the script, almost sure that the next step would be to get a new MoBo. Hence, there is no reason to prefer SCSI-based harddisk to the more inexpensive EIDE drives. Peter wrote: "Normally not present in XP, it is created as a reaction to errors. Wish I had some better recommendations, but I can't think of any.

I intend on donating again after my next paycheck. I'm kinda ignorant, but I hope I'm not THAT stupid. Once you reach this level of understanding, you are pretty much ready to build your own stuff.The AMD AHCI sata.inf file is on your mobo CD in a 'drivers' folder. Booting from SCSI disk If the hard disk has to be booted, traditionally it has to be assigned ID 0.

Can't find your answer ? SCSI hard disks can achieve substantially larger transfer capacity than the IDE drives, but they have the same bottle necks: the serial handling of bits in the read/write head, where the As I have years of client data stored in Outlook folders, and projects in process, and although I image the drive every night to an external USB drive, I didn't want Some newer, faster DMA modes are called UDMA (Ultra DMA).

Anyway problem is now solved and DVDs running smoothly! However, I had recorded it's manufacturing date and country of origin. Check or reactivate DMA But this may not always be not enough, because unfortunately Windows does not always automatically activate DMA on a DVD or CD drive.