Home > Hard Drive > Hard Drive Not Showing Up In Bios

Hard Drive Not Showing Up In Bios

Contents

If you need to transfer your data (sometimes called data migration or clone) you can use the Seagate utility DiscWizard. I need to boot up so I can transfer all my info from my C: to my new sata, which will become C: I have no idea how to do this, However, a new cable is ~$5. Does the computer see the drive? http://olivettipc.com/hard-drive/2nd-hard-drive-not-showing-up.html

I have an Intel D865GBF mobo with integrated SATA controller ports with all the latest drivers installed. SATA drives may look like fast parallel ATA drives to applications, but they differ in some significant details.... PaperdocApr 15, 2009, 9:57 PM aford10 is right.Do NOT use any spray-on liquid. Just THANKS!

Hard Drive Not Showing Up In Bios

I have a dell 3010 and decided to use a 180GB SSD as my main hard disk for the performance benefit and to use my original 1TB as a data drive. These are usually how the motherboard connectors are going to look. Published 09/20/11 SHOW ARCHIVED READER COMMENTS (12) Comments (12) September 20, 2011 maxmeazle I've usually put all my IDE HDDs as cable select, the motherboard selects it as master or slave All Rights Reserved Tom's Hardware Guide ™ Ad choices SearchStorage Search the TechTarget Network Sign-up now.

They are usually fine as is from the factory. If you can install drives on separate IDE cables, it’s always easier to do so. Report Azure- Jun 26, 2010 at 12:03 AM thank you very much I was frustrated because I had to use a ide to usb for my sata hard drive since my External Hard Drive Not Detected That would be all, if you have any comments or suggestions, reach for the comment section, below.

On the article itself, two comments: 1. Hard Drive Not Showing Up In Disk Management When I did, it let me "create simple partition" (or something like that), do a quick format, and VOILA' it started working and now is just peachy. Join thousands of tech enthusiasts and participate. The drive shows up in BIOS but when Windows loads up, the drive does not show up in My Computer.

The jumpers on a SATA drive, if any, enable other functions, such as advanced power management. Internal Hard Disk Not Detected Yours was the only one that actually made sense, was easy to do, and WORKED! When I check the device manager, it still indicates that it recognizes both of my hard drives. Now it's good :) Report ivi- Apr 15, 2010 at 06:58 PM m8 ur a legend thank u so much Report munhas- Apr 17, 2010 at 02:59 PM thanks very much..i

  • Hook up the Hard Drive to another computer and try some of the Data Reocvery software that allows you to recover 1 or 2 files to see if it works before
  • Report xpcman 17187Posts Wednesday October 8, 2008Registration date ContributorStatus February 21, 2017 Last seen - Feb 1, 2009 at 12:51 PM This could be a BIOS problem.
  • Main BIOS w/Genie BIOS selected by OCN NameUnknown, assumed fair use.
  • This tool will repair most computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance.
  • On the pic directly above, you can see the part on the power/cable end of the IDE drive that shows the pins where you make your jumper settings.
  • Try installing it in a different computer, using a different controller (if not on the motherboard) to check it out.

Hard Drive Not Showing Up In Disk Management

Then you format the partition - again right click and select format use NTSF - use default allocation size and give the new volume a label (no spaces allowed in the After it boots OK, use Windows Management (right click on Manage from My Computer pop-up) to resize the new C: to include the remaining disk space I am sure smarter folks Hard Drive Not Showing Up In Bios Report John Sweden- Dec 13, 2008 at 10:00 AM That was the best tips I ever found on the internet, thanx xp Report Raju- Dec 31, 2008 at 10:26 PM If How To Connect Sata Hard Drive To Motherboard First you partition - do a primary partition if you want only one partition on the hard drive.

Then I added my 2nd drive. http://olivettipc.com/hard-drive/hard-drive-not-showing-up-in-windows-10.html I recently came across a WD baracude SATA 160gb hard drive. Report NatureBased- Jun 11, 2010 at 02:38 PM Thank you! Reply With Quote 10-25-200812:13 PM #9 arraknid Moderator Forum Moderator Join Date Dec 2006 Location France Posts 6,154 Points 1293 Blog Entries4 If you are seeing the drive intermirrently, and you've How To Connect Sata Hard Drive To Usb

Unlike ATA and SCSI drives, SATA drives don't need to be terminated or otherwise set with the on-drive jumpers for ordinary operation. It can scrub dirt and oxides off a metal surface without putting mini-scratches in it. UDMA cables have color coded connections which require proper orientation when connecting. navigate here If you choose not to install the drivers, your BIOS will treat the drive as an IDE drive.

Seriously, thank you! How To Repair Hard Disk Not Detected Bingo! Simply back up the files you want to restore later and reinstall Windows, or whatever.

Before I found this solution, Disk Management said the whole drive was "unallocated".

Check that each drive is properly connected to the controller. Most modern PCs still use a BIOS utility to set boot disk order, and manage an array of other low-level utilities that run the PC. This is usually done by pressing a special key, such as DELETE, ESC, or F1 during the startup process.Within the system setup program, instruct the system to auto detect your new Bad Sata Cable Symptoms In the BIOS setup goto "Integrated Peripherals", select "OnChip IDE Device", now my "SATA Mode" was set to RAID, so I changed it to IDE and saved the config.

Does the power light come on? The computers he learned on used ferrite cores and magnetic drums. You should be able to see the drive in this list of boot devices. his comment is here Select Storage from the left hand side by clicking it once, then select Disk Management(local) from the right side by double-clicking it.

Please suggest a way out. HDD The leading standard in enterprise capacity and performance SSD Flash-based storage for instant access to data Systems Building the highest performing and scalable data storage infrastructure possible ⎙Print ✉Mail Share This will not have any affect on your computer. Oh, and a last rule: do this one cable and one end at a time.

Thank you!!! Thanks everyone for your diligence and your willingness to share with others. All rights reserved. All other images by the author, borrowed from fellow HTG authors, credited in previous articles, or assumed fair use.

You have exceeded the maximum character limit. The pins/connectors on the motherboard have been damaged. Now is when the contribution here may materialize for some. *** 1. Thank You.

Using Acronis Disk Director , I simply had to reassign a drive letter to my hard disk partition, it will be detected by My Computer, with all data accessible too! Komprise Data Management Grid broadens file analytics The Komprise data plane sits out of band to return adaptive file analytics on data and metadata. Much appreciated. They can help diagnose problems with specific makes of drives.

If not, you’ll have to find or buy some hard drive screws.